MANTA
The Manta bench is available in two configurations: a mobile version on wheels, to be used with any two-post lift or with a scissor lift (4.5 or 6.0 Tons).
On both models it is possible to mount different series of sill clamps (both universal and specific) and its specific Manta pull post. Naturally both models are predisposed to host on the crossbeams the Universal Jig system and the Electronic measuring instrument Contact Evolution
MURAENA
The Muraena bench is available in two configurations: a mobile version on wheels, to be used with any two-post lift or with a scissor lift (4.5 or 6.0 Tons).
On both models it is possible to mount different series of sill clamps (both universal and specific) and two types of pull posts: Muraena or Piranha. Naturally both models are predisposed to fit on the crossbeams the Universal Jig system and the Electronic measuring instrument Contact Evolution.
TRITON
ARO provides solutions to meet spot, seam, butt and projection welding applications. All requirements for these four types of welding are easily met by ARO’s wide range of options in these world class stationary welding machines.
Frame Length | 3000 mm (9′ 8″) |
Frame Width | 880 mm |
Max. lifting height from working area | 1840 mm (6′) |
Minimum Height | 115 mm (0,38′) |
Load Capacity | 3000 Kg (6,614 lb) |
Lift Weight | 0.87 t |
Nominal Power | 2 KW |
Nominal Voltage | 380V |
Nominal Current | 4,3 A |
Nominal Frequency | 50 Hz |
Max pressure when lifting | 320 Bar |
Weight of electrohydraulic control unit | 60 Kg |
Control unit tank capacity | 5 L |
OCTOPUS
The panel beater has always had the need to have a puling system that allows him to make pulls in the desired direction and oriented in space. The ‘OCTOPUS’ pulling system satisfies this need by allowing you to repair any type of accident on all points of the car. In the front, in the rear, on the sides, under the floor, inside the passenger compartment or in the engine compartment; it is in fact possible to direct the pull in the direction of the resultant of the forces that caused the deformation during the crash and in the opposite direction.
The system consists of two pull posts, each of which runs on a beam placed laterally on the bench.
The beams can be removed and brought closer to the bench with a pneumatic gun. Each arm, equipped with fully mechanized movements, is able to assume, thanks to the five degrees of freedom, any pulling direction. The system can be locked in the position and with the desired angle, the desired pull can be performed when the locking is completed.
SPECIFIC
The close collaboration between Car Bench International S.p.A. and the most prestigious car manufacturers in the world has led to the development and continuous updating of specific jig kits. Thanks to a continuous comparison and to a meticulous study on the repair, Car Bench creates and markets these kits, specific for the models indicated by the car manufacturers.
These kits allow, among other things, the possibility of detecting more points. This peculiarity has an important impact on the work of the manufacturer: improving quality, simplifying difficulties and improving timing.
UNIVERSALE
The unique “Universal Jig – Evolution D” combined with the new technical data sheet in 3D has allowed to further improve the Car Bench ORIGINAL universal jig system, already recognized in over 70 countries as the most successful approved jig system carrying most prestigious OEM approvals on the world market today.
Technical aspects of the UNIVERSAL JIG – EVOLUTION D, which make it the most flexible system on the market are based on the following advantages:
- Maximum adaptability on every checking point of the vehicle covering the whole underbody.
- Simultaneous control of every single checking point of the vehicle, both close points and asymmetric points, without the need of any additional parts or extensions, furthermore it controls the MacPherson directly from the underbody of the vehicle.
CONTACT EVO(ELECTRONIC MEASURING SYSTEM)
Contact Evolution measuring system – unique in the world of its kind – represents an electronic system projected into future engineering. Born from the basic principles of a calibration machine it carries a huge developing potential and further future applications. We recently added a feature to allow measurements of external panels of vehicle (wheels on the floor!) with mechanics mounted. Thanks to its sophisticated and advanced software and hardware it can guarantee maximum precision of measurements (+/- 0,5 mm on a length spread of 5.4 meters).
Contact Evolution measuring system – unique in the world of its kind – represents an electronic system projected into future engineering. Born from the basic principles of a calibration machine it carries a huge developing potential and further future applications. We recently added a feature to allow measurements of external panels of vehicle (wheels on the floor!) with mechanics mounted. Thanks to its sophisticated and advanced software and hardware it can guarantee maximum precision of measurements (+/- 0,5 mm on a length spread of 5.4 meters).
Car Bench Contact Evolution latest Measuring software enables the operator to quickly measure a vehicle to properly diagnose and identify damages without lifting the vehicle or putting it on a Jig Bench. This process ensures a Correct First Inspection reducing additional estimates. The process will take maximum 7 minutes.
TRITON
The ‘Triton’ Quick Pull Bench is a bench mounted on a double-effect electro-hydraulic scissor lift. It can be installed within the floor, or placed on the lift plate and can also mount four wheels that make it perfectly mobile.
It is suitable for any type of spot repair of cars and small commercial vehicles.
More Details
Equipped with an easy and fast pulling system (with 10 Tons pulling capacity), applicable at any point of the frame, with vertical and horizontal rotation +/- 90 °.
Excellent as a lift for disassembly and reassembly. The anchoring of the car can be done with the provided universal sill clamps in a practical and fast way. In addition, a package is also provided for the 'Triton' model which offers the possibility of mounting - in a reduced version - the universal Jig.
HEAVY DUTY TRUCK CLAMP & ANCHORING SYSTEM
With the Car Bench Heavy Duty Truck Clamp and Anchoring system, you will be able to carry out big collision repair work on any Truck, Pickup, Van, SUV and Full Frame cars without any hassle during set up and repair procedures.
More Details
Car Bench Anchoring System, has been studied by our experts in order for one person alone to set it up easily. Within less than 10 minutes the truck will be completely anchored and tied down to the Car Bench frame in a safe and proper way, ready for any type of pulling operation.
SILL CLAMPS FOR VEHICLES
Car Bench offers a wide range of universal and specific Sill Clamps for various car brands.
PNEUMO-HYDRAULIC LIFTS
The “Turtle” bench is produced accordingly to the most rigid safety rule (CE-certification).
Its pneumo-hydraulic lift can be fixed on the floor or eventually embedded thanks to a special embedding kit; it can be installed inside any type of spray booths or preparation areas.
More Details
The cylinder mounted on the lift is covered by special protection to avoid any damages due to the painting work. The Turtle is equipped with a special pump for lifting operations with remote control and with 4 special axle stands which are positioned directly on the regulating arms.
start your project now
contact us today
info@panirex.com
We reply within 24 hours
Contact Now
P.O. Box 262076
Tel: 009714-8810866
Fax; 009714-8810867
Address
Jafza 7 Building Office F03 Jebel Ali Freezone Dubai UAE
Copyright © 2021. Panirex FZE. Powered by Catnyx Digital Media