Finishing Products

ROTOLO FOAM

Rotolo Foam pre-cut sheets are ideal for fine sanding on round edges, contours and curves, providing a smooth finish on primers and top coats. The secret of Rotolo Foam lies in the combination of premium abrasive sanding paper and special foam backing. Rotolo is pre-cut to guarantee a straight edge when a piece is torn and prevents scratches from an unevenly torn edge.

NORTON PRO PLUS A975

  • The best of the best Norton SG ceramic grain combined with heat-treated aluminium oxide gives an outstanding cut rate.
  • Fibre reinforced paper combined with flexible foam backing is ideal for use on round edges, contours and curves without breaking through the paint
  •  No-Fil® treatment prevents clogging, increasing performance and lifetime
  • Units are packed in a handy dispenser box and have colour coded labels that show the grit size for quick product selection and easy storage

NORTON MAX A295

  • White aluminium oxide grain is specially selected for finer sanding and finishing applications due to the quality of surface finish and the No-Fil® layer reduces clogging and improves product life
  • Light flexible paper backing gives a smooth and consistent finish throughout the whole process
  • The flexible foam is ideal for use on round edges, contours and curves without breaking through the paint
  • Units are packed in a handy dispenser box and have colour coded labels that show the grit size for quick product selection and easy storage

NORTON PRO A275

  • Norton Pro A275 is a premium abrasive available in the full grit range for all common sanding and finishing applications. and thanks to the No-Fil® treatment, clogging is reduced, increasing product performance and life
  • The flexible foam is ideal for use on round edges, contours and curves without breaking through the paint
  • Rolls are packed in a handy dispenser box and have colour coded labels that show the grit size for quick product selection and easy storage

GOLD RESERVE A296

  • With sharp aluminium oxide grains, Gold Reserve is available in coarser grades, ideal for feather edging, stripping old paint and dry sanding of filler by hand
  • Durable B-weight latex paper backing supports tougher applications whist maintaining flexibility and is resistant to tearing
  • The No-Fil® water based stearate layer prevents dust build-up on the disc meaning it can be used for longer until being changed

BEARTEX NON-WOVEN

BearTex is made from abrasive grain bonded to synthetic nylon to provide a pliable, long lasting solution for cleaning, finishing and blending applications on
curved or flat surfaces. The open mesh construction does not load with dust and shapes itself to contours for a uniform finish.

ROTOLO ROLLS BEARTEX PRE-CUT ROLLS

  • Flexible, durable and perfect for use on contoured surfaces or hard to reach areas. Comes in a roll dispenser for easy storage and access to the product
  • Available in silicon carbide (S) or aluminium oxide (A)

STANDARD ROLLS BEARTEX

  • For cleaning and blending applications

PRE-CUT HAND PADS BEARTEX

  • Excellent flexibility, easy to tear, for dry or wet use. Combine the grey
    and gold pads with Norton Scuff Gel to clean, degrease and abrade in
    one step.

THIN-FLEX HAND PADS BEARTEX

  •  Thinner than standard BearTex, when greater precision is needed. Flexible and durable, for use on contoured surfaces and hard to reach areas.

PLAIN DISCS BEARTEX

  • Three-dimensional discs that conform to panels and uneven surfaces thanks to the nylon fibre impregnated with abrasive

DISCS BEARTEX

  • Three-dimensional discs that conform to panels and uneven surfaces thanks to the nylon fibre impregnated with abrasive
  • Hole configuration designed to extract dust from the surface for a cleaner working environment and better surface finish

SCUFF GEL

  • Norton Scuff Gel is formulated to clean, degrease and abrade in one step
  • Designed for use with grey and gold BearTex pads, using Scuff Gel gives better paint adhesion
  • The water based formula rinses easily and leaves no mess

BACK-UP PADS

BLACK ICE T417

  •  Premium silicon carbide grain delivers a fast initial cut and imparts a consistent finish across the surface
  • The synthetic bond gives flexibility to the sandpaper, without cracking or curling, ideal when used on vehicle contours
  • Use with a sanding block on flat surfaces or by hand, the extended grit range into higher grades is ideal for finer finishing applications
  • Use wet for sanding polyurethane primer and cutting back an old surface before spraying, can also be used for cutting back flush joints

NORTON T489

  •  Sharp silicon carbide grain cuts through rust and corrosion fast
  • Flexible backing conforms to curves and contours, making T489 ideal for use on panels, wings, wheel arches and bumpers
  •  Can be used on lacquer, paint, metal, glass and composites
  • Can be used wet or dry

NORTON T100

  • Aluminium oxide waterproof paper can be used wet or dry for removing paint spots and dust
  • The flexible latex backing helps the sheets adapt to curves and contours
  • Electrostatic deposition of the grain provides good stock removal due to its aggressive cutting action. The sandpaper is well suited to removing paint spots and dust inclusions

BLACK ICE T417

  • Aluminium oxide waterproof paper can be used wet or dry for removing paint spots and dust
  • The flexible latex backing helps the sheets adapt to curves and contours
  • Electrostatic deposition of the grain provides good stock removal due to its aggressive cutting action. The sandpaper is well suited to removing paint
  • pots and dust inclusions

BLACK ICE ROSETTE DISCS SELF ADHESIVE

  • Self-adhesive waterproof rosette discs combine a lightweight paper backing with ultra-fine grain for fine sanding applications in a small area
  • Use with a sanding block, or by hand, to eliminate small flaws in lacquer (stone chips, paint runs, etc.) before polishing or buffing
  • Use with a sanding block for best results and an even finish
  • Use wet for sanding polyurethane primer and cutting back an old surface before spraying, can also be used for cutting backflush joints

SOFT TOUCH SANDING SPONGES

  • Thanks to the soft foam sponge backing, these sponges conform to the most complex shapes
  • They generate a finer finish than conventional coated abrasives and when used wet, have a very long life

NORTON ICE DISCS Q255

  • Polish in spot repair applications faster thanks to the uniform cut, smooth finish and lower scratch depth
  • The open mesh foam backing moulds to the surface for even distribution of pressure for consistent finish
  • The mesh foam is waterproof, making the disc washable and reusable, can also be used by hand
  • Colour coded discs make grit identification possible at-a-glance

LIQUID ICE - QUICK CUT

  • Polish after grade 1500, use with hard foam or lambswool for best results
  • Follow with OEM and black backed finishing foam to achieve a perfect gloss finish

LIQUID ICE - OEM

  • To remove holograms and clouds and improve gloss for a final finish

LIQUID ICE DETAILER SPRAY

  • Liquid Ice Detailer Spray cleans up excess buffing residue and provides paint protection
  • Simply spray on and wipe off with a Blue Magnet microfibre cloth for the perfect showroom shine

start your project now

contact us today

info@panirex.com

We reply within 24 hours

Contact Now

P.O. Box 262076

Tel: 009714-8810866

Fax; 009714-8810867

Address

Jafza 7 Building Office F03 Jebel Ali Freezone Dubai UAE

Copyright © 2021. Panirex FZE. Powered by Catnyx Digital Media

Facebook Twitter Google-plus Linkedin